NOTE: 

This requires that you know the admin password to the device

The location of the "Default" settings may move as firmware is updated and change, but the concept is the same. 


First login to the web interface of the camera by going to the IP address of the camera


  1. Click the Configuration tab
  2. Click Advanced Configuration
  3. Click System
  4. Click the Maintenance tab
  5. Click Restore or Default button

The Restore button will reset all configuration settings accept the IP parameters and user accounts. This is good to quickly reset events, schedules, and image settings

The Default button will reset the entire camera to factory defaults including the user accounts and IP address. Once this is complete you will need to use the SADP tool to change the IP address of the camera again.